News - Page 6 of 12 - Orbitbid.com

Paul R. Grill Farm Equipment Retirement Auction

Posted on October 9, 2019October 9, 2019 by admin

Great farm equipment and land!

Paul R. Grill has retired after 46 successful years of farming and is selling his full line of farm equipment through and Orbitbid.com farm equipment auction. If you are looking for any specific equipment, this is the auction for you. From tractors to planters and even a 1969 John Deere tractor in great condition, you are sure to find whatever you are looking for – and maybe even a few things that you weren’t looking for! This auction will take place on Tuesday, October 15th through an online auction. Don Young will also be selling his equipment in addition to Mr. Grill’s in this auction. All of the information for the auction is the same as it is a combined auction. Check out a few of the featured lots below or head straight to the auction!

Paul R. Grill will also be selling his real estate through an auction with LASTBIDrealestate.com the same day. Click here to go to the real estate auction.

Whole Paul R. Grill Auction

Don Young Specific Items

1969 John Deere 4020 Tractor

Excellent condition
Side Console, New John Deere engine kit
Fuel tank sealed
Synchro range transmission
16.9×38”rear tires, 9.5×15” front tires
New radiator and water pump
All new belts and hoses
2 rear hyd outlets
Shows 10 hrs on new engine kit
Rebuilt front end
New clutch and brakes
New synchros in transmission
New seat and suspension
New axle bearings
All new control levers
New gauges and halogen lights
New starter and alternator
New transmission pump
Tractor looks and runs like new
SN: T213R204838R
Ground-up Restoration

Starting Bid: $100.00

Kinze 2600 16 Row Planter

Looking for a new planter to prepare for next planting season? In this auction we have a Kinze 2600 16 Row Planter, liquid fertilizer, red ball markers, 30″ rows with controls.

Starting Bid: $5.00

John Deere 9770 STS Combine

John Deere 9770 STS Combine 4WD, green star ready, contour master, 20.8R42 front duals, 28L 26 rear tires, bullet rotor, 1927 engine hours, 1268 seperator hours, S/N: H097705725263.

Starting Bid: $5.00

Case MXM 175 Tractor

MFWD
Good, Clean Tractor
Cab
18 speed power shift transmission
4 rear hydraulic remotes, 540 & 1000 PTO
New batteries
3292 hrs
14.9×46” rear axle duals, 14.9×30” front tires
SN: AOM240553

Starting Bid: $100.00

Unverferth 275 Grain Cart

Unverferth 275 Grain Cart with bin extensions, 6″ unload auger, Unverferth 610 running gear.

Starting Bid: $5.00

We hope that you have found something that you are interested in bidding on! Head on over to the full auction by clicking here. If you have any questions feel free to contact us here. We want to make sure that you feel comfortable with our bidding process and are ready to participate in any of our auctions! Happy bidding!

SunMart Foods Supermarket Liquidation

Posted on October 3, 2019October 18, 2019 by admin

SunMart Foods, a national grocery chain has elected to sell all of their inventory including the commercial restaurant, deli, and supermarket equipment through Online Auction on Orbitbid.com on Tuesday, October 8!

Equipment Includes: Commercial kitchen, deli, supermarket & bakery equipment, stainless steel sinks & tables, ice machines, display coolers & freezers, balers, compressors, store fixtures, safes, Lozier shelving, forklifts, pallet jacks, pallet racking, warehouse equipment, and much more.

View all auction items here https://bit.ly/2ovdvOh

Items are located at 1205 W. Lincoln Ave., Fergus Falls, Minnesota

View more items here https://bid.orbitbid.com

Silver Lake Country Club Equipment Auction

Posted on October 3, 2019October 3, 2019 by admin

Golf carts galore!

Silver Lake Country Club has elected to close it’s doors and is selling it’s equipment in an online auction with us on October 8th! From golf carts and law care equipment to jet skis and TVs anyone and everyone can find something in this auction! If you have any questions surrounding the auction or would like information contact us here. Check out some of the featured lots below, or go straight to the auction by clicking here.

2004 Club Car 48V Electric Golf Cart

(1) 2004 Club Car 48V electric golf cart, S/N PQ0441-447043, with overhead enclosure, fold down front windshield, bag holder, and pneumatic tires, in working condition, includes 2004 2004 Club Car Power Drive 2 charger. (Cart #24)

There are MANY golf carts up for auction besides just this lot – go to the full auction site to bid on all of them.

Starting Bid: $100.00

Toro Reelmaster Ride On Mower

(1) Toro Reelmaster 5300D, 5-Reel gas powered ride on mower with 24″ reels, diesel engine, hydrostatic transmission, headlights, (hours unknown), runs and operates.

Starting Bid: $100.00

Entire Contents of Pro Shop Office

Entire content of Pro Shop office, includes (1) 60″ width x 29″ height x 30″ depth wood composite/laminate desk, (1) Brother, model DCP-7065DN, printer/scanner/copier (in working condition), (1) 30″ width x 29″ height x 24″ depth steel framed cabinet on plastic casters with wood composite/laminate top, (1) 15″ width x 29″ height x 22″ depth 2-drawer steel file cabinet, (1) 15″ width x 26.5″ height x 20″ depth 3-drawer cabinet (1 drawer is file drawer), (1) rolling office chair with net seat and back and vinyl padded arms, (1) carpet protector, and misc. other items, winning bidder responsible for proper removal of all items.

Starting Bid: $5.00

Ford 2000 Tractor

(1) Ford 2000 gas powered tractor with a 4 cylinder engine, manual transmission, 5988 hours on meter, 3 pt. hitch, size 13.6-28 rear tires, size F78-15 4-ply front tires, working condition unknown, could not start, no other info available.

Starting Bid: $100.00

Toro Workman 3200 Motorized Sprayer

(1) Toro Workman 3200 gas powered, motorized sprayer, model 07202, S/N 80127, with a Mitsubishi 3 cylinder gas engine, 3-speed manual transmission with high/low range, differential lock, hydraulic dump, foot and hand throttle, speed limiter, 1934 hours on meter, 190 gallon capacity tank, approx. 18′ boom (fully extended), approx. 5 gallon capacity fuel tank, in running condition, appears to run and operate, unit is equipped with a Toro Pro control unit for boom control.

Starting Bid: $100.00

If there is anything that caught your eye head on over to the auction by clicking the button below! As a reminder the auction will take place on Tuesday, October 8th, closing at 7:30pm EDT. If you have any questions, please feel free to contact us here. Happy Bidding!

Taylor Tooling Bankruptcy Auction

Posted on September 25, 2019September 25, 2019 by admin

Tool & die machinery and equipment located in Walker (Grand Rapids), MI

Per Order of Bankruptcy Court, all the machinery & equipment from Taylor Tooling Group, LLC will be sold in an online auction with Orbitbid.com on Wednesday, October 2nd. This auction will include some great tool and die equipment that would be a perfect addition to your own shop. With everything from drills, lathes and welders to a 2104 Vtec CNC Bridge Mill and a Warco Straight Side Press, you are bound to find something that interests you. Check out a few of the featured items below or go straight to the auction by clicking here!

Bliss 200-Ton Straight Side Press

This is a Bliss, model 6-96, approx. 200-ton straight side press with a 60″ x 96″ bed, and air counter balance. Also includes Windows, air feed, a single grip feeder, can do 20 strokes per minute, 12″ stroke, 17.5″ max. shut height, 60″ max. bolster size. The winning bidder is responsible for proper disassembly and removal, DOES NOT INCLUDE ANY ATTACHED TOOLING.

Starting Bid: $100

Richmond Radial Arm Drill, Model HR10

Looking for a drill? In this auction we have a Richmond, model HR10, radial arm drill. I has and approximated 11 inch diameter column, 48 inch arm, and the T-slotted table measures 24 inch width x 40 inch depth. This lot does not include the attached tooling. The winning bidder is responsible for proper disassembly and removal.

Starting Bid: $100

Gallmeyer & Livingston Surface Grinder

Need to change out your current surface grinder? One of the lots in this auction is a Gallmeyer & Livingston #35 surface grinder with 6″ x 13″ magnetic chuck, with a built in coolant and hydraulic table, S/N 351135. The winning bidder is responsible for proper disassembly and removal of the surface grinder.

Starting Bid: $100

Dake Band Saw, Model XC

Does your current band saw need an upgrade? Taylor Tooling has Dake, model XC, band saw as part of its assets up for auction. This band saw has a 9″ throat and an 18″ x 28″ table. S/N 199660, 120V single phase electric motor. The winning bidder is responsible for proper disassembly and removal of the band saw. Please contact us with any questions concerning the items

Starting Bid: $100

If you saw anything that you liked, make sure to head over to the auction by clicking the button below to make sure that you have a chance to bid on it. If you have any questions please feel free to contact us here and we would be more than happy to help with anything you need!

Mahnomen Baked Chips – Complete Liquidation

Posted on September 24, 2019 by admin

Interested in starting or expanding a chip company?

All of the assets from Mahnomen Baked Chips are being liquidated in a featured online auction on Tuesday, October 1st. The auction will start at 8am and will begin closing at 6pm the same day. All of the equipment is located in Mahnomen, MN. There is some great equipment that would be a great benefit if you are looking to expand or start your own chip company! Check out a few of the featured items below or click here to head over to the auction to view all the items!

Garland Master Electric Convection Oven

This is a Garland Master 200, model MCO-ES-10, single deck, standard depth full size electric convection oven. Great for baking a variety of items, this piece would be a great addition to any large kitchen. It is 208V, 3 phase. If you are interested in bidding on this item click the button bellow!

Starting Bid: $5

Taishin Industry Packing Conveyor

The next featured lot is a Taishin Industry Packing conveyor. This conveyor is a Type T-CV-07, with a 43 1/4″ rubber belt x 237″ length, and a SEW Eurodrive motor, 480V, KW1.50. This would be a great addition for a company looking to start packaging their goods for sale on a larger sale. Click the button below to visit the online auction.

Starting Bid: $5

Oil Spray Coating Machine

This oil spray coating machine includes a wire mesh belt conveyor, spray applicators and oil re-circulation unit. It is mounted on casters. This machine has been used in the production of chips but there is always the possibility that it could be used to coat other products.

Starting Bid: $250

We hope that you have found something that interests you and that might bring you dream of running a chip company to fruition. Please contact us if you need any other information, or click the button below to go to the auction!

Detroit Department of Transportation Auction

Posted on September 24, 2019September 24, 2019 by admin

Detroit Vehicles and Buses up for Auction

Is your department looking to increase your fleet of vehicles? Do you want to convert a bus for a road trip or some other multi functional purpose? If so, you are in luck! The Detroit Department of Transportation is liquidating some of their vehicles that have served the city well on October 1st through an online auction! All items are located in Detroit, MI. From city buses that have circulated commuters, general transportation vehicles such as vans and SUVs to even an old police car, there is likely to be an item that will fit your needs. There are a few additional lots with office furniture, vehicle supplies and multiple bus driving simulators to practice driving! To view all the items up for auction click here, but check out a few of our featured items below!

2005 40' Long New Flyer Passenger Bus

This forty foot passenger bus (VIN 5FYD4FV175C027700) has 631,487 miles miles on it with a Cummins diesel engine. There is an Allison automatic transmission with push button controls, air brakes, and a fire suppression system. It has an electric air ride driver’s seat. There are some missing parts, the mid-section passenger door has some damage, missing 1 passenger side rear tire, and the running condition unknown. There is no other information available. The vehicle has been removed from service. This is Bus #4157

Starting Bid: $100

2013 Dodge Charger Police Cruiser

Ever wanted to drive your own police car? This police cruiser has a 3.6 liter gas engine, automatic transmission, AM/FM stereo with steering wheel controls, A/C, and cruise control with steering wheel controls. The interior features cloth bucket front seats, a vinyl bench rear seat, power windows/locks/seats & mirrors, and driver and passenger side air bags. The center console has been removed, running condition unknown, mileage and running condition unknown.

Starting Bid: $100

Bus Driver Training Simulator Station

Do you need to train your bus drivers to handle larger vehicles to make sure that their driving is top notch for their safety as well as passengers, pedestrians and other vehicles? Bid on this bus driver training simulator station! It has three 27″ screens, a simulated speedometer cluster, gas and brake pedal, air ride seat, FAAC remote control unit, and a 33″ width x 27″ height x 56″ depth platform. The winning bidder is responsible for proper disassembly and removal.

Starting Bid: $5

If you are looking for any other vehicles please check out the rest of the auction by clicking the button below! If you have any questions concerning the auction, would like to sell your own equipment or vehicles, or want to know more about our company, contact us here. We wish you the best of luck in the auction!

Olsen Bros. Transportation Liquidation Auction

Posted on September 10, 2019September 10, 2019 by admin

By order of secured creditor Olsen Bros. Transportation is liquidating their fleet of semi trucks and equipment in an online auction. The auction begins on Wednesday, 9/11 and will run until 7:30 pm Tuesday 9/24 (MDT). All assets will be sold to the highest bidder with no minimums and no reserves! Equipment is located in Ogden, Utah. Check out a few of the featured items in the auction to find the next great addition to your fleet of equipment.

2017 Freightliner Cascadia 3AKNGLDRXHSHD9572:

General Description: (1) tandem axle with bunk bed in cab tractor truck, 53,200 lb. GVWR, 11,017 hours, DD15, 14.8 liter 505 HP diesel engine, DT12-0A-1650HD 12-speed overdrive auto transmission, 265″ wheel base, 3.08 ratio, differential lock, air slide 5th wheel, engine brake, dual power windows, power locks, dual power mirrors, steering wheel controls, Kenwood touch screen CD player, Dometic refrigerator, A/C, dual air ride seat, aluminum reams, 27580R225 front steer tires, 27580R225 rear drive tires, 4-air bag suspension, single stack, dual 120 gallon aluminum fuel tanks, missing some rubber edging on driver’s side, (2) ProTech side mount tool boxes (1 missing steps), various nicks and scratches on front bumper, engine light on, 13,300 lb. front axle, 20,000 lb. rear axles, lift tag axle controller in cab (may have been removed), windshield chipped, runs and drivers. Unit #622

Starting Bid: $1,000

Aluminum Flat Bed Trailer, Fontaine
Model PAFTW-5-8048WSWT, 71,473 lb.:

General Description: (1) Fontaine, model PAFTW-5-8048WSWT, aluminum flat bed trailer, 71,473 lb. GVWR, tandem spread axle, 102″ wide x 48′, air brakes, landing gear, air suspension, aluminum deck, repair needed to damaged side edge, Phantom aluminum tool boxes (doors are scratched and dented, won’t close properly), steel rims one axle/aluminum on other, with 29575R22.5 tires. Unit #541

Starting Bid $100

2012 Great Dane Reefer Tandem Axle 53' x 101" Wide Trailer:

General Description: (1) 2012 Great Dane Reefer tandem axle 53′ x 101″ wide trailer, aluminum skin, rear swing doors, aluminum floor, manual landing gear, air suspension, aluminum rims, manual landing gear, approx. 50 gallon aluminum reefer diesel tank, 29575R225 tires, Carrier X2100A, reefer unit, VIN 1GRAA0629CW700035, 23,625 hours on reefer, reefer does start, 68,000 lb. GVWR, model SUP-114-31053, coupler height of 47″. Unit #607

Starting Bid $100

These three featured items are incredible, but there are so many other great finds in this semi truck and transportation assets liquidation. See some more of the auction highlights to the right – or go straight to the auction to bid on the transportation equipment and assets!

Additional Auction Highlights

2016 & 2017 Freightliner Cascadia Semi-Trucks
2018 Fontaine 55MX-T Double Drop Step Deck Trailer
2015 Fontaine Revolution Aluminum Flatbed Trailers
2017 Manac Aluminum Flatbed Trailers
2016 Dodge Ram 3500HD Laramie Pickup Truck
2014 Reitnouer Aluminum Flatbed Trailers
2015 Transcraft Aluminum Step Deck Trailer
2011 Heartland Cyclone 3612 Toy Hauler RV Trailer
2013 Great Dane Aluminum Flatbed Trailers
2012 Great Dane Reefer Trailers
2014 Polaris Razor 4 UTV
2013 Freightliner Cascadia Semi-Truck
2012 Kenworth T660 Semi-Truck
Truck & Trailer Accessories

All Stone Concepts Machinery & Assets Auction

Posted on August 7, 2019September 20, 2019 by AJ JAGER

Looking for a Granite or Stone Cutting Machine?

All Stone Concepts in Gainesville, Georgia is selling select assets and you will have the opportunity to purchase their equipment! All Stone Concepts is a custom cabinet and countertop center and is one of the largest granite fabricators in northeast Georgia. Some of their granite and stone cutting machines alongside their general equipment will be up for auction. Whether your cabinet and countertop company is looking to expand production or you are looking to start your own firm, this is the auction for you.

Selling from two different locations in Gainesville, the equipment will feature an array of:

Edgemarc 2500HT Single Beam Bridge Saw
(2) Achilli Single Beam Bridge Saws
Gordon Double Beam Bridge Saw
(5) Bay Dust Collection System
Genie PLC-36 Lift
Workforce 300# Capacity Personal Lift
Spanco 2-Ton Gantry Crane
Thibault Sink Cutout Machine
Grizzly G1035 Shaper
Kreg Face Frame Air Table
Token M72311 Hinge Drilling Machine
Delta Line Boring Machine
Husky Air Compressor
2-Paint Booths
Misc. Belt Conveyors

Assorted Air Compressors
2006 Ford Expedition
1999 Mitsubishi Cab Over Box Truck
Chevrolet 3500 Pickup Truck
2006 GMC 4500 Cab Over Box Truck
Banding Carts
Steel Top Router Tables with Foot Pedal Controls
Power Strapper
(3) Makita Bench Top Table Saws
Delta 10” Chop Saw
Lifting Beams
Shop Fans
Vacuum Systems
Miscellaneous Machinery and Equipment
And much more!

This featured online auction will take place on Tuesday, August 13, 2019, starting at 8:00am, and closing will begin at 6:00pm the same day (EST). Onsite preview is available the day before the auction from 9:00am – 4:00pm and auction day from 8:00am – 5:00pm

All of the items available in this auction can be found by clicking the button below. Find the granite or stone cutting machine you’ve been looking for!

Sutter Family’s Incredible Car Collection is now at Auction.

Posted on May 27, 2019May 22, 2019 by Miedema Auctioneers

If you are a lover of classic collector cars, then you'll want to make sure you check out this auction!

This is a very rare and one of a kind car collection including cars that were in the Sutter Family for over 50 years, many of which were purchased new by the seller or seller’s parents, several are all original and/or are one-owner cars, along with several other very unique and desirable cars in excellent condition with very low original miles.

All of the vehicles within this auction will be selling to the highest bidder with no minimums and no reserves.

This auction will take place on Tuesday, June 19, with preview day on Monday, June 18. For early or special preview, please call Dave at 616-401-9059 to make special appointments.

Click Here to View all Cars

Holland Lake Golf Course | Equipment Auction

Posted on May 24, 2019May 22, 2019 by Miedema Auctioneers

Do you own a golf course, or maybe you're in the market for a golf cart, mower or even a beverage cart! Well, you're in luck!

Tuesday, June 18 we are selling all assets and equipment from Holland Lake Golf Course in Sheridan, Michigan.

This auction will consist a variety of 30+ Club Car & Yamaha golf carts, utility & beverage carts,John Deere lawn tractors, grounds & lawn care equipment & much more!

Just like all of our auctions, if you’re interested in any of the items within this auction, but you want to preview the items in person first, there are preview times available for this auction.

Preview times are on Monday, June 17 from 10am – 4pm, along with auction day (June 18) from 8am – 5 pm.

Great farm equipment and land!

Whole Paul R. Grill Auction

Don Young Specific Items

1969 John Deere 4020 Tractor

Kinze 2600 16 Row Planter

John Deere 9770 STS Combine

Case MXM 175 Tractor

Unverferth 275 Grain Cart

Golf carts galore!

2004 Club Car 48V Electric Golf Cart

Toro Reelmaster Ride On Mower

Entire Contents of Pro Shop Office

Ford 2000 Tractor

Toro Workman 3200 Motorized Sprayer

Tool & die machinery and equipment located in Walker (Grand Rapids), MI

Bliss 200-Ton Straight Side Press

Richmond Radial Arm Drill, Model HR10

Gallmeyer & Livingston Surface Grinder

Dake Band Saw, Model XC

Interested in starting or expanding a chip company?

Garland Master Electric Convection Oven

Taishin Industry Packing Conveyor

Oil Spray Coating Machine

Detroit Vehicles and Buses up for Auction

2005 40' Long New Flyer Passenger Bus

2013 Dodge Charger Police Cruiser

Bus Driver Training Simulator Station

2017 Freightliner Cascadia 3AKNGLDRXHSHD9572:

Aluminum Flat Bed Trailer, Fontaine Model PAFTW-5-8048WSWT, 71,473 lb.:

2012 Great Dane Reefer Tandem Axle 53' x 101" Wide Trailer:

Additional Auction Highlights

Looking for a Granite or Stone Cutting Machine?

If you are a lover of classic collector cars, then you'll want to make sure you check out this auction!

Do you own a golf course, or maybe you're in the market for a golf cart, mower or even a beverage cart! Well, you're in luck!

Aluminum Flat Bed Trailer, Fontaine
Model PAFTW-5-8048WSWT, 71,473 lb.: